Garage Designer

The Free 3D Garage Designer for Metal Building Dealers

SimpleLexi's garage designer lets your customers design a metal garage in 3D, place doors and windows, compare every manufacturer's price, and order at the lowest price, right on your dealer website. Free for dealers.

What Is the SimpleLexi Garage Designer?

The SimpleLexi Garage Designer is a free, embeddable 3D configurator that lets metal building dealers sell steel garages online. Customers start from a standard build such as a 2-Car Garage or 30×40 Workshop, adjust the dimensions, place roll-up doors, walk-in doors, and windows, pick colors and gauge, and see a live price from every manufacturer in the SimpleLexi network.

Garages are where quoting gets slow: door sizes, leg heights, lean-tos, and slab questions turn into a week of email. The garage designer answers all of it on screen, then finds the lowest manufacturer price, guaranteed at least 7% below any dealer. It runs alongside the carport builder in the same widget.

  • Doors, windows, and dimensions placed directly on the 3D model
  • Manufacturer price comparison on every change
  • Concrete slab, permits, and financing built into the quote
  • Free for dealers, embeddable on any website
Garage · 24' × 30' · 10' eave
24'-0"30'-0"10'-0"

How the Garage Designer Works

The same four steps as every SimpleLexi build, with garage-specific options at step two.

1

Customer Picks a Standard Garage

One-car, two-car, three-car, RV garage, or the 30×40 Workshop. Each template opens with real defaults, so a price is on screen before they change a thing.

2

They Design It in 3D

Adjust width, length, and leg height. Drop in roll-up doors, walk-in doors, and windows. Choose the roof style, 14-gauge or 12-gauge framing, and colors. The model and the price update instantly.

3

SimpleLexi Compares Every Manufacturer

The exact configuration runs against every manufacturer in the network and comes back as a ranked list, lowest price first, with lead time and warranty beside each option.

4

They Order, You Get Paid

Stripe Connect processes the payment and splits it automatically. A monthly payment toggle lets customers pre-qualify for financing without leaving the designer.

Standard Garage Sizes in the Designer

Every garage starts from a standard build. Customers adjust width, length, and leg height from there, and the 3D model and price update instantly.

Standard BuildBest ForTypical Leg HeightNotes
12×20 One-Car Garage1 vehicle8–9 ftA single roll-up door. Fits one car with light storage along the walls.
20×20 Two-Car Garage2 vehicles8–9 ftThe classic two-car footprint with two single roll-up doors or one double door.
24×24 Two-Car Garage2 vehicles + storage9–10 ftExtra room around the vehicles for shelving, a workbench, or a mower.
24×30 Garage with Workshop2 vehicles + workshop9–10 ftTwo-car parking up front with a dedicated workshop bay in the back.
30×40 Three-Car Garage / Workshop3 vehicles or a full shop10–12 ftOne of the most requested standard builds. Three bays or a full workshop.
40×60 RV Garage & Shop1 RV + 2 vehicles14–16 ftTall clearance for a motorhome with room for vehicles and equipment.

Leg heights are typical starting points. Roll-up door height sets the minimum leg height, and the permit tool flags wind and snow load requirements for the customer's zip code.

Garage Options Your Customers Can Design

Every option that used to need a phone call is a tap in the designer.

Roll-Up Doors

Common sizes such as 9×7, 10×8, 10×10, and 12×12 placed on the 3D model. Customers see at a glance whether a truck, a boat, or an RV will clear the opening.

Walk-In Doors & Windows

Walk-in doors and windows drag onto the 3D model where the customer wants them, and the price updates with each one.

Roof Style

Regular, boxed-eave, and vertical roofs in 3D. Vertical is the usual recommendation for longer garages because the panels shed water and snow.

Gauge Comparison

A visual side-by-side of 14-gauge and 12-gauge framing so the upgrade decision is made on screen, not on the phone.

Colors

Roof, trim, and wall colors render live on the model, so the customer approves the exact garage that gets built.

Slab, Permits & Financing

The concrete slab calculator sizes the pad, the permit tool pulls local wind and snow loads, and a monthly payment toggle shows financing next to the full price.

Why Dealers Choose the SimpleLexi Garage Designer

Garages carry the biggest tickets and the most back-and-forth. This removes the back-and-forth.

Free. No Catch.

No subscription, no setup fee, no per-user charge. SimpleLexi earns a small commission on completed orders, so its incentives are aligned with yours.

Embeds on Your Site

The micro version runs as an iframe on any dealer website and loads in under 2 seconds on 4G. Customers design, compare, and buy without leaving your domain.

Standard Builds Drive Ads

The 2-Car Garage and 30×40 Workshop are landing pages you can send ad traffic to. Analytics show which builds convert and where customers drop off.

Garage Designer FAQ

What is a garage designer?

A garage designer is an online tool that lets a customer lay out a garage, choose its size, add roll-up doors, walk-in doors, and windows, pick colors, and see a price before buying. The SimpleLexi Garage Designer is a free 3D version built for metal building dealers to embed on their websites, with automatic price comparison across every manufacturer in the SimpleLexi network.

Is the SimpleLexi Garage Designer free for dealers?

Yes. SimpleLexi is 100% free for metal building dealers. There is no setup fee, no monthly subscription, and no per-user charge. SimpleLexi earns a small commission on completed orders, so it only makes money when you do.

What garage sizes are available?

Standard builds range from a 12×20 one-car garage to a 40×60 RV garage and shop, including the popular 2-Car Garage and 30×40 Workshop templates. Customers can adjust width, length, and leg height from any starting point, and the 3D model and price update instantly.

Can customers add roll-up doors, walk-in doors, and windows?

Yes. Customers place roll-up doors, walk-in doors, and windows directly on the 3D model and watch the price update as they go. Common roll-up door sizes such as 9×7, 10×8, 10×10, and 12×12 cover everything from a compact car to an RV.

How does the garage designer find the lowest price?

When a customer finishes a design, SimpleLexi runs that exact configuration against every manufacturer in its network and returns a ranked list, lowest price first. The result is guaranteed to be at least 7% below any dealer price, and you earn your commission on the sale.

Can I embed the garage designer on my dealer website?

Yes. SimpleLexi includes an embeddable micro version that runs as a lightweight iframe on any dealer website and loads in under 2 seconds on 4G. Customers design, compare prices, and order without leaving your site.

Does the garage designer handle the concrete slab and permits?

Yes. The built-in concrete slab calculator sizes the slab from the garage footprint and estimates cubic yards and cost, and the permit tool pulls wind load, snow load, and setback requirements for the customer's zip code.

Can customers see financing options?

Yes. A monthly payment toggle shows financing options right next to the full price, and customers can pre-qualify without leaving the configurator.

What steel gauge options are shown?

The gauge comparison display shows 14-gauge and 12-gauge framing side by side so customers understand the difference in strength and price before they choose.

Add a Garage Designer to Your Website

SimpleLexi is free for dealers. Schedule a demo and start selling garages online within days.